MIL-DTL-15665J
forcer ..............................
-
-
X
Any component missing, bent, twisted,
broken or malformed .................
-
*
-
Solder does not completely unite
parts, i.e., any perceptible opening
between component parts .............
-
*
-
Area burned or reduced in soldering .
-
*
-
Soldered joint not clean or smooth ..
-
-
X
Excess solder or excess flux not
removed .............................
-
-
X
Operations are poorly accomplished ..
-
*
-
Letters distorted ...................
-
*
-
Back not flat or smooth when required
X
Attaching
Defective, i.e., any part damaged or
device
malformed which affects use or which
may be expected to affect use .......
X
-
-
Deformed, i.e., any part misshapen,
damaged, bent, but not affecting use
-
-
X
Not type specified ..................
X
-
-
Not positioned as specified .........
X
-
-
Not attached in specified manner,
i.e., not soldered or swaged as
required. ...........................
X
-
-
Metal strip not clinched around shank
prong (when required) ...............
X
-
-
Clutch fastener will not engage or is
loose fit on prong ..................
X
-
-
Clutch pierced through by prong .....
-
*
-
Swaged prong can be removed by hand .
X
-
-
Both swaged prongs are loose and
wobble ..............................
-
-
X
Threads on post or nut are stripped,
crossed, damaged or not specified
size or type ........................
X
-
-
Any component omitted, misplaced,
operation omitted or not properly
performed ...........................
-
*
-
Identification
Missing, incorrect, illegible,
Marking
misspelled, not accomplished as
specified, or not placed as required
-
-
X
TABLE II. Defects (Continued).
EXAMINE
DEFECT
CLASSIFICATION
MAJOR (*) MINOR
Lacquer
Not lacquered when required .........
X
-
-
Areas of no lacquer .................
-
*
-
Lacquer forms noticeable runs or
sharp coarse particles ..............
-
*
-
Foreign matter embedded in finish,
i.e., lint, dust, etc., clearly
noticeable ..........................
-
*
-
Hazy, rainbow effect, cloudy, or
powdering ...........................
-
*
-
Not smooth, continuous or adherent,
i.e., flaking, blistering, peeling,
-
*
-
rippling or has run, sag or drops ...
Not set to touch, i.e., tacky when
13
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business