MIL-DTL-82194C(MC)
rounded effect. The embroidered stitches shall be tightly and
closely drawn so as to produce a clear, sharp, straight edge
outline of the required design, with the corners sharp and
distinct. The density of the stitches shall be such as to
provide full coverage of the underlay material, which shall have
the scarlet surface next to the stitching. The border shall be
securely stitched on with not less than 10 stitches per inch.
Stitching shall be through the crinoline backing. The stitched
on border shall be straight and even without twisting, curling or
other distortion, and shall be made as close as possible to both
sides of the silk embroidery. Ends of the border shall be
securely stitched down. Shoulder straps to be furnished finished
shall be constructed as specified in MIL-DTL-82193. The finished
width of the silk embroidery shall be 1/8 inch, and the finished
width of the embroidery including the border shall be 1/4 inch.
Width of finished shoulder straps shall be 2-3/4 inches at the
armhole end tapering to 1-3/4 inches one inch from the collar
end.
3.6.4 Sleeve ornamentation. Sleeve ornamentation of each class
shall consist of a single line of scarlet silk embroidery
outlined with one continuous length of synthetic gold border
along the top, front, and bottom edges, with gold oak leaf and
acorn design along inside of embroidered edges on class 1 and 2
ornamentation and with gold clover leaf design centered on class
3 sleeve ornamentation, as shown on Figures 1, 2, and 3. The
back edge of the sleeve ornamentation shall have three points
(see Figures 1, 2, and 3), made in accordance with patterns
furnished. Dimensions of finished sleeve ornamentation shall be
6-1/2 inches at top edge, 5-1/2 inches at front edge, and 5-3/4
inches at bottom edge, measured as shown on Figures 1, 2, and 3.
3.6.4.1. Silk embroidery and synthetic gold border. The scarlet
silk embroidery shall be made through the crinoline backing.
Silk embroidery shall have sufficient underlay to produce a well
raised and rounded effect. The embroidery stitches shall be
tightly and closely drawn so as to produce a clear, sharp,
straight edge outline of the required design, with the corners
sharp and distinct. The density of the stitches shall be such as
to provide full coverage of the underlay material, which shall
have the scarlet surface next to the stitching. The border shall
be securely stitched on with not less than 10 stitches per inch.
Stitching shall be through the crinoline backing. The stitched
on border shall be straight and even, without twisting, curling,
or other distortion, and shall be made as close as possible to
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business