MIL-DTL-82194C(MC)
3.6.1.1. Tacking. Ends of stitching shall be securely backtacked
not less than 1/4 inch.
3.6.1.2. Identification marking. The collar and sleeve patches
shall be marked for type and class (see 1.2). The shoulder
straps shall be marked by size. Labels shall conform to types IV
or V, class 2 of DDD-L-20.
3.6.1.3. Cutting. Cut the collar, shoulder straps and sleeve
ornamentation patches with patterns furnished by the Government.
Cut material in the direction indicated by directional lines on
the patterns.
3.6.2 Collar ornamentation. Collar ornamentation shall consist
of a single line of scarlet silk embroidery outlined with one
continuous length of synthetic gold border (see 3.3.2.1) along
top and ends of collar as shown on Figure 4. The scarlet silk
embroidery shall be made through the crinoline backing. Silk
embroidery shall have sufficient underlay to produce well raised
and rounded effect. The embroidered stitches shall be tightly
and closely drawn so as to produce a clear, sharp, straight edge
outline of the required design, with the corners sharp and
distinct. The density of the stitches shall be such as to
provide full coverage of the underlay material, which shall have
the scarlet surface next to the stitching. The synthetic gold
border shall be securely stitched on with not less than 10
stitches per inch. Stitching shall be through the crinoline
backing. The stitched on gold border shall be straight and even
without twisting, curling or other distortion, and shall be sewn
as close as possible to both sides and ends of the silk
embroidery. Ends of the border shall start and finish at one of
the inside corners of the silk embroidery and shall be securely
stitched down. The finished width of the silk embroidery shall
be 1/8 inch, and the finished width of the embroidery including
the border shall be 1/4 inch. The ends of the embroidery shall
finish evenly at the ends of the collar and, after the collar is
assembled to jacket, shall finish 3/16 to 1/4 inch from lower
edge of collar.
3.6.3 Shoulder strap ornamentation. Shoulder strap
ornamentation shall consist of a single line of scarlet silk
embroidery outlined with synthetic gold border around all edges
of the strap as shown on Figure 5. The scarlet silk embroidery
shall be made through the crinoline backing. Silk embroidery
shall have sufficient underlay to produce a well raised and
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business