MIL-DTL-82194C(MC)
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be in
accordance with the applicable subsidiary specifications and
standards to the extent applicable, except that this
specification shall govern in the event of conflict. The method
of testing will be as specified in FED-STD-191, wherever
applicable. Testing shall be performed on components listed in
Table II for characteristics noted.
TABLE II.
Test methods.
Reqmt.
Test
No. Det.
Results
method
per S/unit
reported as
Components
Characteristics
para.
Crinoline
Material
3.3.4.1
1200
Pass or fail
identification
Weight
3.3.4.1
5041
Pass or fail
Thread count
3.3.4.1
Visual
Pass or fail
Breaking strength
3.3.4.1
5100
Pass or fail
Color
3.3.4.1
Visual
Pass or fail
Underlay
Color
3.3.4.2
Visual
Pass or fail
Flexibility
3.3.4.2
5230
Pass or fail
4.4.1.1. Sampling for testing. Unless otherwise specified in
subsidiary specifications, sampling shall be in accordance with
the following. The lot shall be unacceptable if one or more
sample units fail to meet any test requirement specified herein.
Lot size
Sample size
800 or less
2
801 to 22,000 inclusive
3
22,001 and over
5
The unit for expressing lot size and sample unit for testing each
component shall be in accordance with the applicable subsidiary
specifications and as follows:
Component
Expressed as
Sample unit for testing
Crinoline
yards
one yard full width
Underlay
yards
one yard
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business