MIL-DTL-82112C(MC)
Measurement
Tolerance
Less than 1 inch
See note
1 inch and over
+ 1/8 inch
NOTE:
Deviation from specified tolerance affects appearance.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the
Military Department of Defense Agency, or within the Military
Department's Systems Command. Packaging data retrieval is
available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1. Intended use. The ornamentation components described herein
are intended to be worn on evening dress jackets worn by female
officers of the U.S. Marine Corps.
6.2. Acquisition requirements.
Acquisition documents must
specify the following:
a.
Title, number, and date of the specification.
b.
Issue of DoDISS to be cited in the solicitation, and if
required, the specific issue of individual documents referenced
(see 2.2).
c.
Packaging requirements (see 5.1).
d.
Type and class required, and whether to be furnished
finished (see 1.2).
e.
Whether first article is required (see 3.2).
6.3. Standard sample. For information regarding availability of
standard sample ornamentation and standard shades specified,
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business