MIL-DTL-3628/98C
WIDTH (overall):
-1 to -3: 1-5/8 inches (REF)
-4 to -6: 1-1/4 inches (REF)
THICKNESS (at thickest point):
-1 to -3: 0.125 inch ± 0.010 inch
-4 to -6: 0.090 inch ± 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Piercing shall be as indicated for both the regular size and mid size.
3. The attaching device shall be prong and clutch type. Two prongs shall be located on
the reverse on the horizontal center line. The prongs shall be located equidistant from
each end 1- 5/16 inches + 1 /64 inch apart on the Regular Size and 1 inch + 1/64 inch on
the Mid Size.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Air Force - 11
Review activities:
(Project No. 8455-2006/014)
Air Force - 99
DLA CT
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the
currency of the information above using the ASSIST Online database at
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business