MIL-DTL-3628/66E
ATTACHING DEVICE:
1. Attaching device shall be two prongs and clutches.
2. The prongs shall be located on the horizontal center line, equidistant from each end
and 1 inch + 1/8 inch apart for -1 and 5/8 inch + 1/8 inch apart for -2.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or
die.
2. Enameled areas shall be black. The color shall conform to TIOH Color Chip No. 26 or
the standard sample.
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of
manufacturer. Epoxy resin shall be smooth and flush with the dikes.
4. -1 and -2 may be manufactured using 22 karat gold plate with nickel underplating and
a mirror-like polished finish which shall match TIOH Metal Finish Chip Number 9 for
commercial sale only.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2014-202)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business