MIL-DTL-3628/15M
DIMENSIONS:
HEIGHT (Including lugs): 0.410 inch (REF)
HEIGHT (Excluding lugs): 0.200 inch (REF)
WIDTH (Overall): 1 inch (REF)
THICKNESS (At rim): 0.060 inch + 0.010 inch.
LUGS, CLASP AND JUMP LINKS:
1. Lugs shall be located equidistant from each end and 0.0675 inch + 0.015 inch.
2. All badge clasps are of identical design except for lettering.
3. Two jump ring links shall be positioned on top lugs and shall use the same finish as the
badge clasp. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in
length and shall be fabricated from 0.044 inch + 0.005 inch diameter wire.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or
die.
2. Badge clasps covered by this specification sheet shall be used in conjunction with the
basic qualification badges on specification sheet MIL-DTL-3628/14.
3. Badge may be nickel or rhodium plated with a mirror-like polished finish which shall
match the TIOH metal Finish Chip Number 16 for commercial sale only. For nickel
plated or rhodium plated items, the silver plating requirement shall not apply.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2013-106)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business