MIL-DTL-3476-26 Brassard, Security Police, U.S. Air Force

Pages 1 - 2

MIL-DTL-3476/26E

3. Base shall be cut from a single ply of the material specified.

4. All letters shall be as indicated on The Institute of Heraldry (TIOH) Drawing B-8-58.

5. The loop shall be located on the vertical center line of the brassard with the base 1-1/4 inches +

1/16 inch below the top edge of the brassard and shall be attached to the back of the brassard as

shown. A bar tack may be used to secure the loop in lieu of box stitching at the option of the

manufacturer. However, the ends of the tape must be secured and completely covered by the

stitching. The top of the loop shall be caught in the hem and stitched to the lining. The thread for

stitching the loop shall conform to Type IC2, 3 Ply, Ticket No. A of A-A-52094

6. The attaching device shall be hook and pile conforming to Type II, Class 1 of A-A-55126. The

hook shall be Black HAN 67138 and the pile shall be Blue HX 67123. The hook and pile shall be

positioned and secured to the base fabric as shown using Stitch Type 301 with 12 stitches per inch.

7. A hook and pile fastener shall be used to attach the U.S. Flag patch in the location shown. The

U.S. Flag patch shall be manufactured in accordance with TIOH Drawing Number A-1-786 and MIL-

DTL-14652. The hook and pile shall measure 2 inches by 3 inches and match Blue HX 67123. The

hook shall be attached to the patch and the pile shall be attached to the base material using Stitch

Type 301 with 12 stitches per inch. The thread shall conform to Type IC2, 3 ply, Ticket No. A of A-

A-52094

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify

changes with respect to the previous issue due to the extent of the changes.

Custodians:

Preparing activity:

Army - IH

Air Force - 11

Review activity:

(Project No. 8455-2014-156)

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this document.

Since organizations and responsibilities can change, you should verify the currency of the information

above using the ASSIST Online database at https://assist.dla.mil.

Page 2 of 2