MIL-DTL-11484/90D
MATERIAL: Gilding Metal
FINISH:
BASE:
-1 thru -6: Hard Enameled, Gold Plated, Mirror-Like Polished and shall match TIOH
Metal Finish Chip Number 6.
-7, -8: Hard Enameled, Nickel Plated, Silver Plated, Matte Finish and shall match
TIOH Metal Finish Chip Number 12.
DEVICE: Hard Enameled, Nickel Plated, Silver Plated, Oxidized, Relieved, Polished
Highlights and shall match TIOH Metal Finish Chip Number 15.
DIMENSIONS:
BASE:
DIAMETER: 5/8 inch (1.59 cm) (REF)
THICKNESS (At Edge): 0.050 inch + 0.005 inch (0.127 cm + 0.012 cm)
DEVICE:
HEIGHT (Overall): 5/16 inch (0.79 cm) (REF)
WIDTH (Overall): 3/8 inch (0.95 cm) (REF)
THICKNESS (At Shield): 0.070 inch + 0.010 inch (0.178 cm + 0.025 cm)
THICKNESS (Assembled): 0.120 inch + 0.010 inch (0.305 cm + 0.025 cm)
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Enameled areas shall be as indicated. The colors shall conform to the TIOH color
chip numbers listed below or the standard sample.
COLOR
CHIP NO.
Red
1
Blue
18
Black
26
White
28
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer.
4. The device shall be located as shown and shall be secured to the base by means of
two rivets located on the horizontal center line of the device.
5. Dash No. -1 and -2 shall have a minimum 2 point, Grade A diamond set in a three
bead setting located as shown.
2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business