MIL-DTL-11484/367
lieu of epoxy. If hard cloisonné enamel is used, the required base material shall be Gilding
Metal 95/5 (UNS Alloy No.C-210).
TIOH HARD ENAMEL COLOR CHIPS
COLOR
CHIP NUMBER
RED
#1
YELLOW
#8
GREEN
#12
BLUE
#18
ATTACHING DEVICE: Attaching device is prong with pick and wing type clutch. The prong
shall be centered on the reverse side and either fused or hard soldered to the lapel button.
NOTES:
1. The term (REF) refers to measurements taken from the Government furnished hub or die.
2. The manufacturer may deviate from MIL-DTL-11484 by using nickel underplating prior to
applying the requisite 24K gold plating.
Custodians:
Preparing activity:
Army - IH
Army - IH
Air Force - 11
Review activity:
(Project No. 8455-2015-002)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business