MIL-DTL-3943/90D
WIDTH:
-1: 1-3/8 inches (REF)
-2: 11/16 inch (REF)
THICKNESS (at thickest point):
-1: 0.110 inch + 0.005 inch
-2: 0.095 inch + 0.005 inch
DEVICE:
HEIGHT (overall):
-1: 7/8 inch (REF)
-2: 7/16 inch (REF)
WIDTH:
-1: 3/4 inch (REF)
-2: 3/8 inch (REF)
THICKNESS (at thickest point):
-1: 0.055 inch + 0.005 inch
-2: 0.055 inch + 0.005 inch
ASSEMBLED THICKNESS:
-1: 0.165 inch + 0.010 inch
-2: 0.150 inch + 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer. When hard enamel is used, the material requirement shall be gilding metal.
When epoxy is used, the material requirement shall be either red brass or gilding material.
Enameled color shall be green as indicated. The enamel color shall conform to TIOH Chip
Number 12.
3. Device shall be soft soldered to the base.
4. Decoration set shall consist of a regular size medal, a service ribbon and a lapel
button all packaged in a presentation case conforming to MIL-C-14633, Type XIII, Style 2
with a Class 1 or 1A pad.
5. The ribbon for the pendant drape and service ribbon shall conform to
MIL-DTL-11589/226.
6. The lapel button shall conform to MIL-DTL-11484/117.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business