MIL-DTL-3943/8H
DIMENSIONS:
PENDANT:
HEIGHT (including hinge rotor):
-1: 1-1/2 inches (REF)
-2: 27/32 inch (REF)
DIAMETER:
-1: 1-1/4 inches (REF)
-2: 5/8 inch (REF)
THICKNESS (at thickest point):
-1: 0.190 inch ± 0.010 inch
-2: 0.130 inch ± 0.010 inch
SUSPENSION STAR:
HEIGHT (including lug):
-1: 29/32 inch (REF)
-2: 7/16 inch (REF)
WIDTH (overall):
-1: 25/32 inch (REF)
-2: 3/8 inch (REF)
THICKNESS (at thickest point):
-1: 0.125 inch + 0.010 inch
-2: 0.075 inch + 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Enamel colors shall be as indicated. The colors shall conform to TIOH Hard Enamel
Color Chip Numbers listed below.
COLOR
CHIP NUMBER
Dark Blue
20
White
28
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer. When epoxy resin is used in lieu of hard enamel, the material requirement shall
be gilding metal or red brass.
4. Suspension star shall be secured to the pendant by a hinge joint.
5. The hinge for Dash No. -1 shall be 1/8 inch ± 1/64 inch high by 1/8 inch ± 1/64 inch
wide by 3/16 inch ± 1/64 inch deep. The hinge for Dash No. -2 shall be 1/16 inch ± 1/64
inch high by 1/16 inch ± 1/64 inch wide by 3/32 inch ± 1/64 inch deep.
6. Hinges for Dash No. -1 shall be soldered to the vertical center line of the star 5/32
inch ± 1/64 inch up from the lower edge. Hinges for Dash -2 shall be soldered to the
vertical center line of the star 5/64 inch ± 1/64 inch up from the lower edge.
2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business