MIL-DTL-3943/78K
DIMENSIONS:
HEIGHT:
BASE (including lug): 1-3/4 inches (REF)
DEVICE: 1-9/32 inches (REF)
WIDTH (at widest point):
BASE: 1-5/32 inches (REF)
DEVICE: 1-3/32 inches (REF)
THICKNESS:
BASE (at thickest point, horizontal arrows): 0.125 inch ± 0.005 inch
DEVICE (at eagle s breast): 0.100 inch ± 0.005 inch
ASSEMBLED (at eagle s breast): 0.225 inch ± 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or
die.
2. The device shall be soldered to the base in the location shown.
3. The decoration pendant shall be lacquered.
4. The reverse shall be suitable for engraving.
5. Decoration set shall consist of a regular size medal, a service ribbon and a lapel button
all packaged in a presentation case conforming to MIL-C-14663, Style 6, Type VIII,
with a Class 1, 1A, or 3 pad.
6. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/88.
7. The label button shall conform to MIL-DTL-11484/200.
CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with
vertical lines to indicate where changes from the previous issue were made. This was done as
a convenience only and the Government assumes no liability whatsoever for any inaccuracies in
these notations. Bidders and contractors are cautioned to evaluate the requirements of this
document based on the entire content irrespective of the marginal notations and relationship to
the last previous issue.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2010-381)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.daps.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business