MIL-DTL-3943-73 Decoration, Exceptional Civilian Service Award, Defense Intelligence Agency

Pages 1 - 2

MIL-DTL-3943/73G

DIMENSIONS:

HEIGHT (overall): 2-3/32 inches (REF)

DIAMETER: 1-1/2 inches (REF)

THICKNESS (center of the world): 0.200 inch + 0.010 inch

NOTES:

1. The term (REF) refers to the measurements taken from the Government furnished

hub and die.

2. Enameled area shall be blue as indicated. The color shall conform to TIOH Hard

Enamel Color Chip Number 18.

3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the

manufacturer. When epoxy resin is used in lieu of hard enamel, the material requirement

shall be gilding metal or red brass.

4. Pierced areas shall be as indicated.

5. The reverse of the pendant shall be flat.

6. The lug shall be soldered on the vertical center line of the torch with the center of the

lug located 5/32 inch + 1/32 inch below the top of the torch.

7. Decoration set shall consist of a regular size medal, a service ribbon, and a lapel

button all packaged in a presentation case conforming to MIL-DTL-14633, Style 6, Type

VIII with a Class 1, 1A or 3 pad.

8. The ribbon for the pendant drape and service ribbon shall conform to

MIL-DTL-11589/183.

9. The lapel button shall conform to MIL-DTL-11484/92.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to

identify changes with respect to the previous issue due to the extent of the changes.

Custodian:

Preparing activity:

Army - IH

DIA - DI

(Project No. 8455-2008-014)

Review activities:

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this

document. Since organizations and responsibilities can change, you should verify the

currency of the information above using the ASSIST Online database at

2 of 2