MIL-DTL-3943/72F
FINISH:
OBVERSE:
SHELL: Gold Plated, Buffed Relieved, Polished Highlights.
INSERT: Hard Enameled, Gold Plated, Buffed Relieved, Polished Highlights.
REVERSE: Gold Plated, Buffed Relieved, Matte Finish, Polished Highlights.
DIMENSIONS:
SHELL:
HEIGHT (overall):
-1: 1-7/8 inches (REF)
-2: 15/16 inch (REF)
WIDTH (overall):
-1: 1-5/8 inches (REF)
-2: 15/16 inch (REF)
THICKNESS (at eagle's shield):
-1: 0.135 inch ± 0.005 inch
-2: 0.090 inch ± 0.005 inch
INSERT:
HEIGHT (overall):
-1: 1-3/16 inches (REF)
-2: 19/32 inch (REF)
WIDTH (overall):
-1: 1-1/4 inches (REF)
-2: 5/8 inch (REF)
THICKNESS (at thickest point):
-1: 0.080 inch ± 0.005 inch
-2: 0.060 inch ± 0.005 inch
ASSEMBLED THICKNESS (at eagle's shield):
-1: 0.215 inch ± 0.010 inch
-2: 0.150 inch ± 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Enameled color shall be blue as indicated. The enamel color shall conform to the
TIOH Hard Enamel Color Chip Number 33.
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer. When hard enamel is used, the material requirement shall be gilding metal.
When epoxy is used, the material requirement shall be either red brass or gilding material.
4. Pierced areas shall be as indicated.
5. The insert shall be soft soldered to the shell in the position shown.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business