MIL-DTL-3943/7J
-2: Hard Enameled, Gold Plated, Matte Finish, Polished Highlights and shall match
TIOH Metal Finish Chip Number 8.
DIMENSIONS:
PENDANT:
HEIGHT (pendant and suspension bar):
-1: 1-31/32 inches (REF)
-2: 1 inch (REF)
DIAMETER:
-1: 1-1/2 inches (REF)
-2: 3/4 inch (REF)
THICKNESS:
-1: 0.215 inch ± 0.010 inch
-2: 0.110 inch ± 0.010 inch
SUSPENSION BAR (Dash No. 1 only):
HEIGHT (overall): 9/32 inch (REF)
WIDTH (overall): 1-3/8 inches (REF)
THICKNESS (at thickest point): 0.160 inch ± 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Dash No. -2 is one piece construction.
3. The suspension ribbon bar for Dash No. -1 shall be made from brass wire 0.045 inch
± 0.002 inch in diameter and shall be riveted to the suspension bar at each end.
4. The pendant shall be secured to the suspension bar by a swivel joint formed by a
round bar from the pendant passing completely through the suspension bar and the end
peened.
5. Enamel color shall be blue as indicated. The enamel color shall conform to TIOH Hard
Enamel Color Chip Number 20.
6. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer. When epoxy resin is used in lieu of hard enamel, the material requirement
shall be gilding metal or red brass.
7. Pierced areas shall be as indicated.
8. Decoration set shall consist of a regular size medal, a miniature size medal, a
service ribbon, and a lapel button all packaged in a presentation case conforming to MIL-
DTL-14633, Style 5, Type V with a Class 2 or 2A pad.
9. The ribbon for the pendant drape and service ribbon shall conform to
MIL-DTL-11589/52.
2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business