MIL-DTL-3943/65G
DIMENSIONS:
BASE:
HEIGHT (including lug): 1-5/8 inches (REF)
DIAMETER: 1-1/2 inches (REF)
THICKNESS (on lettering): 0.125 inch + 0.005 inch
DEVICE:
DIAMETER (world): 11/16 inch (REF)
THICKNESS (thickest point): 0.150 inch + 0.005 inch
ASSEMBLED THICKNESS (thickest point): 0.275 inch + 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub and die.
2. Enameled areas shall be as indicated. The colors shall conform to TIOH Hard
Enamel Color Chip Numbers listed below.
COLOR
CHIP NO.
Blue
18
White
28
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer. When hard enamel is used, the material requirement shall be gilding metal.
When epoxy resin is used in lieu of hard enamel, the material requirement shall be gilding metal
or red brass.
4. The device shall be soft soldered to the base in the location shown.
5. Decoration set shall consist of a regular size medal and a service ribbon all
packaged in a presentation case conforming to MIL-DTL-14633, Type XV, Style 1 with a
Class 1 or 1A pad.
6. The ribbon for the pendant drape and service ribbon shall conform to
MIL-DTL-11589/169.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business