MIL-DTL-3943/52H
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. The suspension ring shall be fabricated from 0.070 inch ± 0.002 inch nominal diameter
14 karat gold wire. The ring shall have an outside diameter of 1/2 inch ± 1/64 inch.
3. The hole through the integral lug shall be 0.090 inch ± 0.005 inch in diameter.
4. The neck ribbon shall be in accordance with Figure 8 of the general specification.
5. The reverse shall be flat and suitable for engraving.
6. The specification slash sheet for the ribbon for the pendant drape and service ribbon
is MIL-DTL-11589/124
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2013-203)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.dla.mil.
.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business