MIL-DTL-3943/47G
DIMENSIONS:
PENDANT:
HEIGHT (overall):
-1: 1-7/8 inches (REF)
-2: (including suspense ring): 1-1/2 inches (REF)
WIDTH (overall):
-1: 1-1/2 inches (REF)
-2: 3/4 inch (REF)
THICKNESS (at thickest point):
-1: 0.195 inch ± 0.010 inch
-2: 0.115 inch ± 0.010 inch
SUSPENSION BAR: (See Note 2)
HEIGHT (including hinged joint): 19/32 inch(REF)
WIDTH (overall): 19/32 inch (REF)
THICKNESS (at thickest point): 0.100 inch ± 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. The suspension bar for the Dash No. -2 decoration is an integral part of the pendant.
Therefore, dimensions given for the suspension bar are for the Dash No. -1 decoration
only.
3. Pierced areas shall be as indicated.
4. Enamel colors shall be as indicated. The colors shall conform to TIOH Hard Enamel
Color Chip Numbers listed below.
COLOR
CHIP NO.
Green
11
Blue
18
White
28
5. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the
manufacturer. When epoxy resin is used in lieu of hard enamel, the material requirement
shall be gilding metal or red brass.
6. The pendant ribbon ring for Dash No. -1 shall be soldered to the top of the wreath.
The ring shall have an outside diameter of 13/32 inch + 1/32 inch - 0 and shall be formed
from 0.045 inch ± 0.002 inch in diameter brass wire.
7. Decoration set shall consist of a regular size medal, a service ribbon, and a rosette
all packaged in a presentation case conforming to MIL-DTL-14633, Type VIII, Style 6 with a
Class 1, 1A or 3 pad.
8. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-
11589/86.
9. The rosette shall conform to MIL-DTL-14649/11.
2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business