MIL-DTL-3943/146E
DIMENSIONS:
DIAMETER:
-1: 1-7/16 inches (REF)
-2: 3/4 inch (REF)
HEIGHT (To Wing Tip):
-1: 1-13/16 inches (REF)
-2: 1 inch (REF)
THICKNESS:
BASE:
-1: 0.130 inch ± 0.005 inch
-2: 0.090 inch ± 0.005 inch
DEVICE:
-1: 0.070 inch ± 0.005 inch
-2: 0.060 inch ± 0.005 inch
THICKNESS (overall at thickest point):
-1: 0.200 inch ± 0.010 inch
-2: 0.150 inch ± 0.010 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Enameled areas shall be as indicated. The colors shall conform to the TIOH Hard
Enamel Color Chip Numbers listed below.
COLOR
CHIP NUMBER
Green
12
Blue
18
Blue
33
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of
manufacturer. When epoxy resin is used in lieu of hard enamel, the material requirement shall
be gilding metal or red brass.
4. The suspension device is part of the base. The reverse side of the suspension
device shall be flat.
5. The inscription bar on the reverse of the medal shall be suitable for engraving.
6. Decoration set shall consist of a regular size medal, miniature size medal, service
ribbon, and a lapel button all packaged in a presentation case conforming to MIL-DTL-
14633, Type V, Style 5 with a Class 1 or 1a pad.
7. The ribbon for the pendant drape shall conform to MIL-DTL-11589/372.
8. The lapel button shall conform to MIL-DTL-11484/192.
2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business