MIL-DTL-3628/85C
3. Lugs for the suspension bar and pendant shall be equidistant from each end and 7/8 inch +
1/64 inch on center. The lugs shall be fabricated from bronze wire for -1 and nickel plated wire
for -2 with a diameter of 0.050 inch + 0.005 inch.
4. Lugs shall be hard soldered to the pendant or bar.
5. Links shall be fabricated from copper wire for -1 and nickel plated wire for -2 with a nominal
diameter of 0.050 inch. The overall dimension of the links shall be 1/4 inch + 1/64 inch in length
and 7/32 inch + 1/64 inch in width.
6. The target and coat of arms shall be superimposed and secured to the pendant in the
location shown using soft solder.
NOTE:
The term (REF) refers to the measurements taken from the Government furnished hub or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army - IH
Army - IH
Air Force - 11
Review activity:
(Project No. 8455-2014-211)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 3 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business