MIL-DTL-3628/67E
DIMENSIONS:
HEIGHT (Overall):
-1: 5/8 inches (REF)
-2: 1/4 inches (REF)
WIDTH (Overall):
-1: 1-9/16 Inches (REF)
-2: 1 Inch (REF)
THICKNESS: (At edge):
-1: 0.080 inch + 0.010 inch
-2: 0.070 inch + 0.010 inch
ATTACHING DEVICE:
1: Attaching device shall be two prongs and clutches.
2: The prongs shall be located on the horizontal center line, equidistant from each end
and 1 inch + 1/8 inch apart for -1 and 5/8 inch + 1/8 inch apart for -2.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or
die.
2. Hard enamel may be used in lieu of Epoxy resin (stoning epoxy) at the option of the
manufacturer. Epoxy resin, If hard enamel I used the material shall be Gilding Metal 95/15
(UNC Alloy C-210).
3. -1 and -2 may be manufactured using 22K Gold Plated Mirror-like Polished with
Nickel underplating and shall match TIOH Metal Finish Chip Number 9 for commercial sale
only.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army IH
Army - IH
Review activity:
(Project No. 8455-2013-102)
DLA CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business