MIL-DTL-3628/59F
DIMENSIONS:
DIAMETER (Overall):
-1, -2, -3: 1-3/8inches (REF)
-4, -5, -6: 3/4 inch (REF)
THICKNESS (At thickest point):
-1, -2, -3: 0.102 inch + 0.010 inch
-4, -5, -6: 0.064 inch + 0.010 inch
ATTACHING DEVICE:
1. The attaching device shall be prong and flat ball clutch.
2. -1, -2, & -3 two prongs shall be located on the reverse on the horizontal center line.
The prongs shall be located equidistant from each end 1-1/8 inches ± 1/32 inch apart.
3. -4, -5, & -6 a single prong with pick shall be located on the reverse and shall be
centered on the device.
NOTES:
1: The term (REF) refers to the measurements taken from the Government furnished hub or
die.
2: A mock forcer may be used to bring up the center of the badge.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2014-175)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business