MIL-DTL-3628/57H
FINISH: (-1through -6) Nickel Plated, Mirror-like Polished, and shall match The Institute of
Heraldry (TIOH) Metal Finish Chip Number 16.
DIMENSIONS:
HEIGHT (Overall):
-1: 3/4inch (REF)
-2: 1-1/16 inches (REF)
-3: 1-3/16 inches (REF)
-4: 5/8 inch (REF)
-5: 57/64 inch (REF)
-6: 57/64 inch (REF)
WIDTH (Overall):
-1 to -3: 1-5/8 inches (REF)
-4 to -6: 1-7/32 inches (REF)
THICKNESS (At thickest point):
-1 to -3: 0.120 inch + 0.010 inch
-4 to -6: 0.092 inch + 0.010 inch
ATTACHING DEVICE AND PIERCING:
1. The attaching device shall be prong and clutch type.
2. Two prongs shall be located at each intersection of the horizontal center line of the
badge and the center of each side of the wreath.
3. Piercing shall be as indicated for both regular and mid size badges except that the mid
size master badge shall not be pierced around the star and wreath.
NOTE:
The term (REF) refers to the measurements taken from the Government furnished hub or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army - IH
Army - IH
Air Force - 11
Review activity:
(Project No. 8455-2014-174)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business