MIL-DTL-3628/45G
DIMENSIONS:
HEIGHT (Overall):
ASSEMBLED: 1-5/16 inches (REF)
PENDANT (Excluding Lugs): 1 inch (REF)
SUSPENSION BAR (Excluding Lugs): 9/32 inch (REF)
WIDTH (Overall):
PENDANT: 1-15/32 inches (REF)
SUSPENSION BAR (Including Balls): 1-17/32 inches (REF)
THICKNESS:
PENDANT (At Thickest Point): 0.110 inch + 0.005 inch
SUSPENSION BAR (At Rim): 0.065 inch + 0.005 inch
ATTACHING DEVICE AND LINKS:
1: The attaching device shall be a prong and flat ball clutch type.
2: The prongs shall be located on the horizontal center line of the back of the suspension
bar equidistant from each end and 1-1/8 inches + 1/32 inch apart.
3: The connecting links shall be formed from 0.042 inch + 0.002 inch diameter wire and
shall be oblong shaped and 3/16 inch + 1/64 inch long by 1/8 inch + 1/64 inch wide.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. The lugs are an integral part of both the pendant and the suspension bar.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army - IH
Army - IH
Navy - MC
Review activity:
(Project No. 8455-2014-194)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business