MIL-DTL-3628/44G
REVERSE:
-1: Gold Plated, Mirror-like Polished
-2: Silver Plated, Mirror-like Polished
-3: Mirror-like Polished
DIMENSIONS:
HEIGHT (Overall):
ASSEMBLED: 1-15/16 inches (REF)
PENDANT (Excluding lugs): 1-15/32 inches (REF)
SUSPENSION BAR (Excluding lugs): 1/4 inch (REF)
WIDTH (Overall):
PENDANT: 1-3/16 inches (REF)
SUSPENSION BAR: 1-29/32 inches (REF)
THICKNESS (At rim):
PENDANT: 0.075 inch + .005 inch
SUSPENSION BAR: 0.060 inch + .005 inch
ATTACHING DEVICE:
1: The attaching device shall be prong and clutch type.
2: Nickel plated flat ball clutches shall be used for -2 and red brass flat ball clutches shall
be used for -1 and -3. The prongs shall be located on the horizontal center line of the back
of the suspension bar equidistant from each end and 1-7/16 inch + 1/16 inch apart.
3: The connecting links shall be formed from 0.042 inch + 0.002 inch diameter wire and
shall have an outside diameter of 3/16 inch + 1/64 inch.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. The lugs are an integral part of both the pendant and suspension bar.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes
Custodians:
Army - IH
Preparing Activity:
Navy - MC
Army - IH
Review activity:
(Project No. 8455-2014-193)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business