MIL-DTL-3628/42F
-3: Hard Enameled, Oxidized, Highlights Polished.
REVERSE - Mirror-like Polished.
SUSPENSION BAR:
-1: Gold Plated, Matte Finish, Polished Highlights and shall match TIOH Metal Finish
Chip Number 8.
REVERSE - Gold Plated, Mirror-like Polished and shall match TIOH Metal Finish
Chip Number 6.
-2: Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights and
shall match TIOH Metal Finish Chip Number 15.
REVERSE - Silver Plated, Mirror-like Polished.
-3: Oxidized, Highlights Polished.
REVERSE - Mirror-like Polished.
DIMENSIONS:
PENDANT:
DIAMETER: 1-9/32 inches (REF)
THICKNESS (at rim): 0.085 inch + 0.005 inch
SUSPENSION BAR:
HEIGHT (overall): 3/8 inch (REF)
WIDTH (overall): 1-15/32 inches (REF)
THICKNESS (edge): 0.065 inch + 0.005 inch
ASSEMBLED HEIGHT (overall): 1-3/4 inches
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Enameled areas shall be as indicated. The color shall conform to the TIOH chip
numbers listed below or the standard sample.
COLOR
CHIP NUMBER
Black
26
White
28
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of
manufacturer. Epoxy resin shall be smooth and flush with the dikes.
4. The connecting links shall be fabricated from wire with a nominal diameter of 0.044
inch, shall be oblong shaped and 3/16 inch + 1/64 inch long by 1/8 inch + 1/64 inch wide.
The links shall be manufactured with the same material and finish as the pendant and
suspension bar.
5. Lugs are integral.
6. The attaching device shall be a prong and flat ball clutch type. Red brass flat ball
clutches shall be used for Dash No. -1 and -3. Nickel plated flat ball clutches shall be used
for Dash No. -2. The prongs shall be located on the horizontal center line of the
suspension bar, equidistant from each end and 1-1/16 inches + 1/32 inch apart.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business