MIL-DTL-3628/40G
-2: OBVERSE: Epoxy resin, Silver Plated, Oxidized, Relieved, Lightly Polished
Highlights and shall match TIOH Metal Finish Chip Number 15.
REVERSE - Silver Plated, Mirror-like Polished.
-3: OBVERSE: Oxidized, Highlights Polished.
REVERSE - Mirror-like Polished.
SUSPENSION BAR:
-1: OBVERSE: 24K Gold Plated, Matte Finish, Polished Highlights and shall match
TIOH Metal Finish Chip Number 8.
REVERSE - Gold Plated, Mirror-like Polished and shall match TIOH Metal Finish
Chip Number 6.
-2: OBVERSE: Silver Plated, Matte Finish, Polished Highlights and shall match TIOH
Metal Finish Chip Number 13.
REVERSE - Silver Plated, Mirror-like Polished.
-3:
OBVERSE: Oxidized, Highlights Polished.
REVERSE - Silver Plated, Mirror-like Polished.
DIMENSIONS:
PENDANT:
DIAMETER: 1-9/32 inches (REF)
THICKNESS (At rim): 0.085 inch + 0.005 inch
SUSPENSION BAR:
HEIGHT (Overall): 3/8 inch (REF)
WIDTH (Overall): 1-15/32 inches (REF)
THICKNESS (Edge): 0.065 inch + 0.005 inch
ASSEMBLED HEIGHT (Overall): 1-7/8 inches
ATTACHING DEVICE:
1: The attaching device shall be a prong and flat ball clutch type.
2: Red brass flat ball clutches shall be used for -1 and -3. Nickel plated flat ball clutches
shall be used for -2. The prongs shall be located on the horizontal center line of the
suspension bar equidistant from each end and 1-1/16 inches + 1/32 inch apart.
3: The connecting links shall be fabricated from wire with a nominal diameter of 0.044
inch, shall be oblong shaped and 3/16 inch + 1/64 inch long by 1/8 inch + 1/64 inch wide.
The links shall be manufactured with the same material and finish as the pendant and
suspension bar.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business