MIL-DTL-3628/37G
REVERSE:
-1: 22K Gold Plated, Mirror-like Polished, TIOH Metal Finish Chip Number 9
-2: Silver Plated, Mirror-like Polished, TIOH Metal Finish Chip Number 15
-3: Mirror-like Polished, Gilding Metal No Metal Finish Chip
DIMENSIONS:
HEIGHT (Overall):
ASSEMBLED: 1-7/8 inches (REF)
PENDANT: 1-1/2 inches (REF)
SUSPENSION BAR: 11/32 inch (REF)
WIDTH (Overall):
PENDANT: 1-1/32 inches (REF)
SUSPENSION BAR: 1-15/32 inches (REF)
THICKNESS (At rim):
PENDANT: 0.055 inch + .005 inch
SUSPENSION BAR: 0.075 inch + .005 inch
ATTACHING DEVICE AND LINKS:
1: The attaching device shall be prong and flat ball clutch type.
2: Nickel plated flat ball clutches shall be used for -2 and red brass flat ball clutches shall
be used for -1 and -3. The prongs shall be located on the horizontal center line of the back
of the suspension bar equidistant from each end and 1-3/32 inch + 1/32 inch apart.
3: The connecting links shall be formed from 0.040 inch + 0.002 inch diameter wire, shall
be oblong in shape and 5/16 inch + 1/64 inch in width.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. The lugs are integral.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army - IH
Army - IH
Navy - MC
Review activity:
(Project No. (8455-2014-189)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business