MIL-DTL-3628/35F
SUSPENSION BAR:
OBVERSE: 24K Gold Plated, Matte Finish, Polished Highlights and shall match TIOH
Metal Finish Chip Number 8.
REVERSE: 24K Gold Plated, Mirror-Like Polished and shall match TIOH Metal Finish
Chip Number 6.
DIMENSIONS:
HEIGHT (Overall):
PENDANT: 1-33/64 inches (REF)
SUSPENSION BAR: 5/16 inch (REF)
WIDTH (Overall):
PENDANT: 1-9/32 inches (REF)
SUSPENSION BAR: 1-7/8 inches (REF)
THICKNESS: (At rim):
PENDANT: 0.080 inch + 0.010 inch
SUSPENSION BAR: 0.055 inch + 0.010 inch
EPOXY: Hard epoxy resin shall be applied as indicated below, and shall match TIOH Hard
Enamel Color Chip Number listed:
TIOH HARD ENAMEL COLOR CHIP NUMBER
LOCATION
Black #26
See Picture
White #28
See Picture
ATTACHING DEVICE AND LUGS:
1. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in length and shall be
fabricated from 0.044 inch + 0.005 inch diameter wire.
2. The attaching device shall be prong and Flat ball clutch type.
3. The prongs and clutch shall be located on the horizontal center line on the back of the
suspension bar equidistant from each end and 1- 1/4 inch + 1/32 inch apart.
4. Lugs are integral
NOTES:
The term (REF) refers to the measurements taken from the Government furnished hub or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business