MIL-DTL-3628/33J
DIMENSIONS:
HEIGHT (Overall):
-1, -2: 15/16 inch (REF)
-3: 9/16 inch (REF)
WIDTH (Overall):
-1, -2: 1-7/16 inch (REF)
-3: 3/4 inch (REF)
THICKNESS: (At Center of Cross):
-1, -2: 0.100 inch + 0.005 inch
-3: 0.060 inch + 0.005 inch
ATTACHING DEVICE:
1. The attaching device shall be prong and clutch type.
2. The prongs shall be located on the horizontal center line equidistant from the each end and
7/8 inch + 1/32 inch apart for -1 and -2 and 7/16 inch + 1/32 inch apart for -3.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished hub or
die.
2. Piercing shall be as indicated for -1 and -2 only.
3. -1 and -3 may be nickel or rhodium plated with a mirror-like polished finish which shall
match TIOH Metal Finish Chip Number 16 for commercial sale only. For nickel or rhodium
plated items, the silver plating requirement shall not apply.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2013-048)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business