MIL-DTL-3628/22H
DIMENSIONS:
HEIGHT (Overall): 0.410 inch (REF)
WIDTH (Overall): 1 inch (REF)
THICKNESS (At rim): 0.060 inch + .010 inch
LUGS & LINKS:
1. Lugs shall be located equidistant from each end and 0.675 inch + 0.015 inch - 0 inch
on centers.
2. Two links shall be positioned on top lugs and shall use the same material and finish as
the badge clasp. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in
length and shall be fabricated from 0.044 inch + 0.005 inch diameter wire.
3. The clasps are of identical design except for lettering; therefore, only one sample is
shown.
4. Badge clasps covered by this specification sheet shall be used in conjunction with the
basic badge covered on specification sheet is MIL-DTL-3628/21.
5. Badge may be Nickel or rhodium plated, Nickel Plated, Mirror-like Polished and shall
match TIOH Metal Finish Chip Number 16 for commercial sale only. For nickel or rhodium
plated items, the silver plating requirement need not apply.
NOTES:
The term (REF) refers to the measurements taken from the Government furnished hub
or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activity:
(Project No. 8455-2013-072)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business