MIL-DTL-3628/16K
FINISH: 1.Red Brass 85/15(UNS Alloy No. C-230): or Nickel Silver: Nickel Plated ,Mirror-like
Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16 except
Textured Background Areas which shall be lightly Polished.
2. Zinc Aluminum: Copper Plated, Nickel Plated, Mirror-like Polished and shall
match TIOH Metal Finish Chip Number 16 except Textured Background Areas which shall
be lightly Polished.
DIMENSIONS:
PENDANT:
HEIGHT (Overall):
-1: 1-5/16 inches (REF)
-2: 1-7/16 inches (REF)
-3: 1-5/32 inches (REF)
THICKNESS:
-1: 0.100 inch + 0.005 inch (At thickest point)
-2: 0.070 inch + 0.005 inch (At rim)
-2: 0.190 inch + 0.005 inch (Total at center)
-3: 0.070 inch + 0.005 inch (At center)
SUSPENSION BAR:
HEIGHT (Excluding lug): 13/32 inch (REF)
WIDTH (Overall): 1-29/32 inches (REF)
THICKNESS (At edge): 0.060 inch + 0.005 inch
ASSEMBLED HEIGHT (Overall):
-1: 1-3/4 inches + 1/64 inch
-2: 1-3/4 inches + 1/64 inch
-3: 1-5/8 inches + 1/64 inch
ATTACHING DEVICE & PIERCING:
1. The attaching device shall be prong and clutch type.
2. The prongs shall be located on the horizontal center line on the back of the suspension
bar equidistant from each end and 1-1/2 inches + 1/16 inch apart.
3. The Marine Corps emblem shall be circumscribed in a 1/2 inch diameter circle and shall be
soft soldered to the target area of the cross for -2 after trimming and piercing.
4. Piercing shall be as indicated for -1 only.
5. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 in length and shall be
fabricated from 0.044 inch + 0.005 inch diameter wire.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business