MIL-DTL-3628/13G
MATERIALS: Red Brass 85/15 (UNS Alloy No.C-230)
F
INISH:
OBVERSE:
-1, -3, -5, -7, -9, -11: Nickel Plated, (C-230 only) Silver Plated, Oxidized, Buffed Relieved,
Matte Finish with reverse and edge clean and shall match The Institute of Heraldry (TIOH) Metal
Finish Chip Number 14.
-2, -4, -6, -8, -10, -12: Brass, Oxidized, Buffed Relieved and shall match TIOH Metal Finish
Chip Number 4.
REVERSE:
-1, -3, -5, -7, -9, -11: Nickel Plated, Silver Plated, Matte Finish and shall match TIOH Metal
Finish Chip Number 12.
-2, -4, -6, -8, -10, -12: Brass, Matte Finish and shall match TIOH Metal Finish Chip
Number 2
DIMENSIONS:
HEIGHT (Overall):
-1, -2, -3, -4: 2-1/4 inches (REF)
-5, -6: 1-1/4 inches (REF)
-7, -8: 11/32 inch (REF)
-9, -10, -11, -12: 19/32 inch (REF)
WITDTH (Overall): 1-1/4 inches (REF)
THICKNESS (At rim): 0.060 inch + 0.010 inch
-1 thru -6: 0.105 inch + 0.010 inch
-7, -8: 0.075 inch + 0.010 inch
-9, -11: 0.080 inch + 0.010 inch
-10,-12: 0.080 inch + 0.010 inch
ATTACHING DEVICE AND LUGS:
1. All lugs are integral.
2. Lugs shall be 0.030 inch + 0.010 inch - 0 in thickness and shall be made with the
same material and finish as the pendant and suspension bar.
3. -5, -6, -7 and -8 shall be furnished with two jump ring links attached. Links shall be
13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in length and shall be fabricated
from 0.044 inch + 0.005 inch diameter wire. The links shall be made with the same
material and finish as the pendant and suspension bar.
4. The attaching device shall be prong and clutch type. The prongs shall be located on
the horizontal center line of the bar equidistant from each end and 3/4 inch + 1/64 apart.
NOTES:
The term (REF) refers to the measurements taken from the Government furnished hub or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Page 2 of 3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business