MIL-DTL-3628/101C
WIDTH (Overall):
-1 to -3: 1-5/8 inches (REF)
-4 to -6: 1-9/32 inches (REF)
THICKNESS (At thickest point):
-1 to -3: 0.130 ± 0.010 inch
-4 to -6: 0.095 ± 0.010 inch
ATTACHING DEVICE:
1. Attaching device shall be prong and clutch type.
2. Two prongs shall be located at each intersection of the horizontal center line of the
badge and the center of each side of the wreath.
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. A mock forcer shall be used in the center of the badge to bring up the design.
3. Piercing shall be as indicated for both the regular and the mid size badges except that
the mid size master badge (-6) shall not be pierced in the area of the wreath and star.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing Activity:
Army - IH
Army - IH
Air Force - 11
Review activity:
(Project No. 8455-2014-101)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business