MIL-DTL-14639/28E
DIMENSIONS:
HEIGHT: 1-1/2 inch (3.81 cm) (REF)
WIDTH: 13/16 inch (2.06 cm) (REF)
THICKNESS: 0.070 inch + 0.005 inch (0.178 cm + 0.12 cm)
NOTES:
1. The term (REF) refers to measurements taken from the Government furnished hub
or die.
2. The prongs shall be located on a horizontal line 5/8 inch + 1/16 inch (1.59 cm + 0.16
cm) above the lowest point of the insignia, equidistant from each side and 11/16 inch +
1/64 inch (1.75 cm + 0.16 cm) apart.
3. For Dash -1, the dull flat enamel shall be Black Chip Number 37038 and the recessed
area shall be Green (Olive Drab) Chip Number 34096, all conforming to FED-STD-595.
For Dash -2, the soft baked enamel area shall be as indicated and conform to TIOH Black
Color Chip Number 26. Sufficient soft enamel shall be applied to cover the recessed area
but not obliterate the textured pattern.
4. Pierced areas shall be as indicated.
5. At the option of the manufacturer for commercial sale only, Dash -2 may be
manufactured using 22 karat gold plate with a mirror-like polished finish and nickel
underplating which shall match TIOH Metal Finish Chip Number 9.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodian:
Preparing activities:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0956)
DLA - CT
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business