MIL-DTL-14639-16 Insignia, Grade, Airman First Class, Air Force

Pages 1 - 2

MIL-DTL-14639/16F

NOTES:

1. The term (REF) refers to measurements taken from the Government

furnished hub or die.

2. For Dash No. -1, enamel color shall be blue in the center of the

star and in the background. The enamel color shall conform to the TIOH

chip number 18.

3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at

the option of the manufacturer. Epoxy resin shall be a stoning epoxy,

have a shore D hardness of 85 and incorporate an ultraviolet inhibitor.

4. Attaching device for Dash No. -1 shall be prong and clutch type.

Prongs shall be located on a horizontal line 13/32 inch + 1/64 inch (1.03

cm + 0.04 cm) above the base of the insignia and 15/16 inch + 1/64 inch

(2.38 cm + 0.04 cm) apart.

5. For Dash No. -2, the dull, flat enamel color shall be Olive Drab

in the center of the star and in the recessed background area and shall

match FED-STD-595, Chip No. 34088. The dull, flat enamel color used in

the raised area for the star and the stripes shall be Black and match

FED-STD-595, Chip No. 37038.

6. Attaching device for Dash No. -2 shall be a brass prong and flat

ball clutch type. Prongs shall have 3 groves and be located on a

horizontal line 13/32 inch + 1/64 inch (1.03 cm + 0.04 cm) above the base

of the insignia and 15/16 inch + 1/64 inch (2.38 cm + 0.04 cm) apart.

7. Insignia may be rhodium plated, mirror-like polish at the option

of the manufacturer.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this

revision to identify changes with respect to the previous issue due to the

extent of the changes.

Custodian:

Preparing activities:

Army - IH

Air Force - 45

Review activities:

(Project No. 8455-0921)

Air Force - 32, 82, 99

DLA - CT

2 of 2