MIL-DTL-11484/7E
EPOXY: Epoxy resin shall be applied to the lapel button as indicated above, and shall match
TIOH Hard Enamel Color Chip Numbers listed below.
TIOH HARD ENAMEL COLOR CHIPS
COLOR
CHIP NUMBER
Red
#1
White
#28
Yellow
#8
ATTACHING DEVICE:
1. The attaching device shall be a prong with pick and wing type clutch.
2. The prong shall be centered on the reverse side and either fused or hard soldered to the
lapel button.
NOTES:
1. The term (REF) refers to the measurements taken from the obverse Government furnished
hub or die.
2. Hard enamel may be used in lieu of epoxy resin at the option of the manufacturer, if hard
enamel is used the material shall be Gilding Metal 95/5 (UNS alloy C-210).
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army - IH
Army - IH
Navy - CG1
Review activity:
(Project No. 8455-2013-080)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the
information above using the ASSIST Online database at https://assist.dla.mil.
Page 2 of 2