MIL-DTL-11484/55D
MINUTEMAN:
HEIGHT (Overall): 13/32 inch (1.03 cm) (REF)
WIDTH (At Widest Point): 11/64 inch (0.44 cm) (REF)
THICKNESS (At Center): 0.065 inch + 0.005 inch (0.165 cm + 0.012 cm)
TOTAL THICKNESS (At Center):
0.120 inch + 0.010 inch (0.304 cm +
0.025 cm)
NOTES:
1. The term (REF) refers to the measurements taken from the
Government furnished hub or die.
2. Enameled area shall be red as indicated. The color shall conform
to the TIOH color chip number 1 or the standard sample.
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at
the option of the manufacturer.
4. The minuteman device shall be pierced between the legs as
indicated. The device shall be centered in the enameled area and
attached to the base by soft soldering or by riveting. If riveting is
used, two rivets shall be required.
5. Attaching device shall be prong with pick and wing type clutch.
The prong shall be centered on the reverse side and fused or soldered to
the lapel button.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0858)
DLA - CT
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business