MIL-DTL-11484/53E
DIMENSIONS:
DIAMETER:
BASE:
37/64 inch (1.46 cm) (REF)
DEVICE:
33/64 inch (1.30 cm) (REF)
THICKNESS:
BASE:
0.060 inch + 0.005 inch (0.152 cm + 0.012 cm)
DEVICE:
0.040 inch + 0.005 inch (0.101 cm + 0.012 cm)
TOTAL THICKNESS (At Shield):
0.100 inch + 0.005 inch (0.254 cm + 0.012
cm)
NOTES:
1. The term (REF) refers to the measurements taken from the
Government furnished hub or die.
2. Enameled areas shall be as indicated. The colors shall conform to
the TIOH color chip numbers listed below or the standard sample.
COLOR
CHIP NO.
Red
1
Green
12
Blue
18
White
28
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at
the option of the manufacturer.
4. The device shall be secured to the base by soldering or by using
two rivets.
5. Attaching device shall be prong with pick with flat ball type
clutch. The prong shall be centered on the reverse side and fused or
soldered to the lapel button.
6.
The full size identification badge shall conform to MIL-B-41809/6.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Air Force - 45
Navy - NU
Review activities:
(Project No. 8455-0858)
Air Force - 32, 82, 99
Navy - MC
Coast Guard - CG
DLA - CT
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business