MIL-DTL-11484/35F
DEVICE:
HEIGHT (Overall):
11/32 inch (0.87 cm) (REF)
THICKNESS (Overall):
0.100 inch + 0.010 inch - 0 (0.254 cm + 0.025
cm - 0)
NOTES:
1. The term (REF) refers to the measurements taken from the
Government furnished hub or die.
2. Enameled area shall be blue as indicated. The color shall conform
to the TIOH color chip number 20 or the standard sample.
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at
the option of the manufacturer.
4. The device shall be secured to the base by two rivets or soft
soldered. When rivets are used, they may be an integral part of the
device or fabricated from any type brass and soldered to the reverse of
the device.
5. Attaching device shall be prong with pick and flat ball clutch.
The prong shall be centered on the reverse side and fused or soldered to
the lapel button.
6.
The full size identification badge shall conform to MIL-B-41809/1.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Air Force - 45
Navy - NU
Review activities:
(Project No. 8455-0858)
Air Force - 32, 82, 99
Navy - MC
Coast Guard - CG
DLA - CT
2 of 2