MIL-DTL-11484/186B
2. Attaching device shall be prong with pick and flat ball type
clutch. The prong shall be centered on the reverse side and fused or
soldered to the lapel button.
3. Each lapel button shall be mounted and centered on a polyethylene
pad and placed in a rigid hinged plastic box having a transparent lid and
opaque bottom section. The box shall have two plastic hinges and catches
and shall be approximately 1-1/8 inches (2.86 cm) square and 5/8 inch
(1.59 cm) in overall depth. The pad shall be of sufficient depth to
restrict movement of the lapel button when the lid is closed.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0858)
DLA - CT
2 of 2