MIL-DTL-11484/170C
-2:
BASE: Hard Enameled, Gold Plated, Light Rose Gold Plated, Matte
Finish, Lightly Polished Highlights.
DEVICE: Gold Plated, Light Rose Gold Plated, Matte Finish, Lightly
Polished Highlights.
-3: BASE: Hard Enameled, Nickel Plated, Silver Plated, Oxidized,
Relieved, Matte Finish, Lightly Polished Highlights and shall
match TIOH Metal Finish Chip Number 15.
DEVICE: Nickel Plated, Silver Plated, Oxidized, Relieved, Matte
Finish, Lightly Polished Highlights and shall match TIOH Metal
Finish Chip Number 15.
DIMENSIONS:
BASE:
HEIGHT (Overall): 5/8 inch (1.59 cm) (REF)
WIDTH (Overall):
5/8 inch (1.59 cm) (REF)
THICKNESS (At Thickest Point): 0.070 inch + 0.005
inch (0.178 cm +
0.012 cm)
DEVICE:
HEIGHT (Overall): 9/32 inch (0.71 cm) (REF)
WIDTH (Overall):
1/2 inch (1.27 cm) (REF)
THICKNESS (At Thickest Point): 0.075 inch + 0.005
inch (0.191 cm +
0.012 cm)
ASSEMBLED THICKNESS (At Thickest Point): 0.155 inch
+ 0.005 inch
(0.394 cm + 0.012 cm)
NOTES:
1. The term (REF) refers to the measurements taken
from the
Government furnished hub or die.
2. Enameled area shall be blue as indicated. The color shall conform
to the TIOH color chip number 33 or the standard sample.
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at
the option of the manufacturer.
4. The device shall be superimposed and secured to the shield by two
rivets or soft soldered. When rivets are used, they shall be solid and
shall be fabricated from any type brass. The rivets shall be located on
and soldered to the vertical center line of the device. The rivets may be
an integral part of the device. The device shall be located as shown.
5.
All lapel buttons shall be lacquered.
6. Attaching device shall be prong with pick and ball type clutch.
The prong shall be centered on the reverse side and fused or soldered to
the lapel button.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0858)
DLA - CT
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business