MIL-DTL-11484/151E
FINISH:
-1, -2:
Oxidized, Relieved, Highlights and Rim Brightly Polished
-3, -4:
Nickel Plated (Red Brass only), Silver Plated, Oxidized,
Relieved, Highlights and Rim Brightly Polished and shall
match TIOH Metal Finish Chip Number 15.
-5, -6, -7, -8, -9: Gold Plated, Matte Finish, Highlights and Rim
Brightly Polished and shall match TIOH Metal Finish Chip
Number 8.
DIMENSIONS:
HEIGHT (Overall): 5/8 inch (1.59 cm) (REF)
WIDTH (Overall):
5/8 inch (1.59 cm) (REF)
THICKNESS (At Edge): 0.110 inch + 0.010 inch (0.279 + 0.025 cm)
NOTES:
1. The term (REF) refers to the measurements taken from the
Government furnished hub or die.
2. Manufacturer shall add the specified number representing the
length of service to the working die in the style and location indicated
on TIOH Drawing number A-9-21. Numbers shall be 0.075 inch + 0.002 inch
(0.190 cm + 0.005 cm) in height.
3. Attaching device shall be prong with pick and flat ball type
clutch. The prong shall be centered on the reverse side and fused or
soldered to the lapel button 1/8 inch (0.32 cm) above the horizontal
center line.
4. Each lapel button shall be mounted and centered on a sulfite board
0.030 inch (0.076 cm in thickness (minimum) and approximately 3-3/4 inches
(9.53 cm) in length by 2-1/4 inches (5.72 cm) wide. The face of the
sulfite board shall be covered with cobalt blue flock. The mounted sulfite
board shall be placed in a rigid hinged plastic box having a transparent
lid and opaque white bottom section. The box shall have two plastic
hinges and catches and shall be approximately 3 inches (7.62 cm) in
length, 1-1/4 inches (3.18 cm) wide and 3/4 inch (1.91 cm) in overall
depth.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0858)
DLA - CT
Civil Agency Coordinating Activity:
GSA- 7FXE
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business