MIL-DTL-11484/125C
2. Enameled colors shall be as indicated. The colors shall conform
to the TIOH chip numbers listed below or the standard sample:
COLOR
CHIP NO.
Red
1
Blue
18
Black
26
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at
the option of the manufacturer.
4. Attaching device shall be prong with pick and flat ball type
clutch or pin and catch as specified. When a prong and flat ball type
clutch is specified, the prong shall be centered on the reverse side and
fused or soldered to the lapel button. When a pin and catch type
attaching device is specified, it shall be soldered or fused to the back
of the lapel button. The pin shall be 1/2 inch + 1/32 inch (1.27 cm + 0.08
cm) long and shall be located on the horizontal center line of the lapel
button with the hinge and catch equidistant from the outer edges.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0858)
DLA - CT
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business