MIL-DTL-11484/112C
DIMENSIONS:
BASE:
DIAMETER: 11/16 inch (1.75 cm) (REF)
THICKNESS (At Thickest Point): 0.060 inch + 0.005 inch (0.152 cm +
0.012 cm)
DEVICE:
HEIGHT (Overall): 11/32 inch (0.36 cm) (REF)
WIDTH (Overall):
5/16 inch (0.79 cm) (REF)
THICKNESS (At Thickest Point): 0.045 inch + 0.005 inch (0.114 cm +
0.012 cm)
ASSEMBLED THICKNESS (At Thickest Point): 0.105 inch + 0.010 inch (0.267
cm + 0.025 cm)
NOTES:
1. The term (REF) refers to the measurements taken from the
Government furnished hub or die.
2. Enameled areas shall be as indicated. The colors shall conform to
the TIOH color chip numbers listed below or the standard sample.
COLOR
CHIP NO.
Red
1
Blue
18
White
28
Light Blue
30
Buff
35
3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at
the option of the manufacturer.
4. The design illustrated is for Dash No. -1. The design for Dash
No. -1 and -2 are identical except the lug is removed in trimming for Dash
No. -2.
5. Attaching device for Dash No. -2 shall be prong with pick and flat
ball type clutch. The prong shall be centered on the reverse side and
fused or soldered to the lapel button.
6. Each lapel button or charm emblem shall be mounted and centered on
a polyethylene pad and placed in a rigid hinged plastic box having a
transparent lid and opaque bottom section. The box shall have two plastic
hinges and catches and shall be approximately 1-1/8 inches (2.86 cm)
square and 5/8 inch (1.59 cm) in overall depth. The pad shall be of
sufficient depth to restrict movement of the lapel button when the lid is
closed.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this
revision to identify changes with respect to the previous issue due to the
extent of the changes.
Custodian:
Preparing activity:
Army - IH
Army - IH
Review activities:
(Project No. 8455-0858)
DLA - CT
2 of 2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business