INCH-POUND
MIL-DTL-11484/173C
11 June 2001
SUPERSEDING
MIL-DTL-11484/173B
27 September 1996
DETAIL SPECIFICATION SHEET
LAPEL BUTTON, EXCEPTIONAL ACHIEVEMENT MEDAL, NASA
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this
specification sheet and the issue of MIL-DTL-11484 listed in that issue of the Department of
Defense Index of Specifications and Standards (DoDISS) specified in the solicitation.
MATERIAL: Red Brass
FINISH: Gold Plated, Rose Gold Plated, Matte Finish with Highlights Relieved
DIMENSIONS:
DIAMETER: 9/16 inch (1.43 cm) (REF)
THICKNESS (At Thickest Point): 0.080 inch ± 0.005 inch
NOTES:
1. The term (REF) refers to the measurements taken from the Government furnished
hub or die.
2. Lapel button shall be lacquered.
3. Attaching device shall be prong with pick and flat ball type clutch. The prong shall
be centered on the reverse side and fused or soldered to the lapel button.
AMSC N/A
1 of 2
FSC 8455
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.