INCH-POUND
MIL-DTL-11589/295D
25 May 2007
SUPERSEDING
MIL-R-11589/295C
30 March 1993
DETAIL SPECIFICATION SHEET
RIBBON, ARMY RESERVE COMPONENT, OVERSEAS TRAINING
This specification is approved for use by all Departments and Agencies
of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and
the latest issue of MIL-DTL-11589.
COLOR PATTERN: REGULAR SIZE
FINISH: MOIRE
COLOR & CABLE NUMBER
TOTAL
WIDTH OF STRIPES
FUNCTION
WIDTH
INCHES
OF STRIPES
STRIPES
FILLING YARN
1/32
Edge & Binder
Ultramarine Blue
HS
67118
9/16
Ground
Ultramarine Blue
HS
67118
1-3/8"
3/64
Ground
White
HA
67101
White
3/32
Ground
Old Glory Red
HBF
67156
3/64
Ground
White
HA
67101
HA 67101
9/16
Ground
Ultramarine Blue
HS
67118
1/32
Edge & Binder
Ultramarine Blue
HS
67118
NOTE: Ribbon shall be cut in 1-3/8 inch strips and mounted horizontally on the ribbon bar. The
ribbon edges shall be neatly trimmed and treated with a colorless transparent adhesive or resin to
prevent raveling. The Old Glory Red HBF 67156 stripe shall be centered and aligned straight in the
horizontal position.
CHANGES FROM PREVIOUS ISSUE: This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors
are cautioned to evaluate the requirements of this document based on the entire content
irrespective of the marginal notations and relationship to the last previous issue.
Custodians:
Preparing activity:
Army - IH
Army - IH
(Project No. 8455-2007-032)
Review activities:
DLA CT
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
1 OF 1
FSC 8455